Non-Halogenated Shock-Oxidizing Agent
This product is a non-halogenated (contains no chlorine or bromine) shock-oxidizing agent. The regular use of this product will oxidize most of the nitrogenous wastes that accumulate in swimming pool water, reducing the demand on the sanitizer used for disinfection. This product is not a sanitizer or algaecide. To sanitize your pool or for removal of algae, use the appropriate product specifically formulated for these purposes.
Read entire label and use strictly in accordance with precautionary statements and directions.
Initial treatment or to clear cloudy water
Use this product at a rate of two pounds (2lb) per 10,000 gallons of pool water.
Use at the rate of one pound (1lb) per 10,000 gallons every week. When the water temperature is above 86°F (30°C) or when the pool is subjected to heavy use, the treatment (1 lb per 10,000 gallons) should be made twice weekly.
Directions for application
1. Broadcast the required amount of this product directly into the deep end of the pool with the filtration system running.
2. Apply in the morning or evening when no bathers are in the water. Swimming or bathing may be resumed in 15 minutes.
3. Maintain pH in the range of 7.2 to 7.6, total alkalinity in the range of 100 ppm to 150 ppm, and calcium hardness in the range of 150 ppm to 300 ppm.
©NC Brands L.P. 2023. All trademarks noted are owned by NC Brands L.P., registered in the United States of America and other countries.